The Finished Tins

So, yesterday I showed you the assortment of tins that I chose with which to build a treat tower and the results of spray painting 2 of the tins gold. Here's what I did to finish those tins.

The lid of the small round tin has an embossed design.

I covered that lid with a wreath of faux greenery, berries, and blossoms, using a hot glue gun.

I also hot-glued a red ribbon around the bottom part of the large square tin, so it would harmonize with the other tins. Here is a side view of the stack. (The lid does fit properly on the bottom tin. I just didn't want to press it on just yet -- waiting for the paint to harden.)

And here's what the top of the stack looks like. I think it's pretty. I could spray paint all of the tins gold, but I like the way this looks as it is. What do you think?

Reminder of what the tins looked like before.

My total cost for these tins? Nothing. The tins, spray paint, faux greenery, ribbon, and glue stick were items that I already had. I'm pretty pleased. When I make a gift, I try to make it as attractive as possible, so that even finicky recipients will be pleased.

The Treat Tower: The Tins

I've seen these in catalogs for years and always wanted to receive one. I know. The crazy things we wish for, right? Anyway, as mentioned yesterday, I am putting together a tower for a gift, using some of my stash of tins. Here's a photo of the tins that I think will work.

There are 5 tins altogether. The top one and bottom 3 (the poinsettia 2 are side by side) are vendor tins. The bottom and top one have labels on them, while the 2 poinsettia tins just say "Happy Holidays." My thought is I only need to paint the bottom and top tins in the photo, as the other 3 will look fine, as is. I'm using some gold spray paint on those two. I've just sprayed the first coat and will do a second coat in a bit. If any of the design shows through, I'll add some extra trim, like ribbon or spray "snow." The top tin has a raised design on the lid. I plan on covering that with a silk blossom, wreath of silk leaves, or large bow, hot-glued onto the top.

I just checked the tins, and the paint is looking good. Here are the bottoms to the tins. The color is kind of off in the photo. They are definitely gold, and not coppery.

No printing shows through, but I think I will wrap a band of red ribbon around the bottom tin to thematically tie it into the rest of the tins.

On spray painting tins -- I cleaned the interiors with soapy water and dried well, using a toothpick to clean out the crack where the base meets the side. I also used rubbing alcohol to thoroughly clean the exterior, so the paint would adhere evenly. I did not do anything else to prepare the tins. I place the tins, upside down, on boxes, in order to spray the sides evenly, without getting paint inside. I plan on leaving the tins open for a week or so, before putting lids back on, to let the paint thoroughly harden. I am very pleased with how the tins painted. As far as I can tell for now, this is a great solution for sprucing up tins.